Request A Quote / Service

Please complete the form below and we will be in touch shortly

Do you know the Colorbond colour, pattern and or finish you are after? *

Most residential doors/gates are only available in colorbond colours, however with some gates, panel, tilt or commercial doors we can have the door powder coated, if you require a special colour please provide the name and code.

Do you require Automation (new motor)? *
We use Merlin & Grifco motors
We do not recommend re-using motors more than 7 years old, that are internal motors or not compliant to Aus/NZ safety standards.
Is the automation for a garage door or driveway gate? *
Do you have internal access? *
Is there another way into the garage that is not the garage door, in the event the power goes out or the motor or door fails
You will require: *
This is a safety device that will allow you to disconnect the motor from the door in the event of an emergency.
Do you have a power point in the garage for the new motor to connect to? *

Our motors come with a 1m cord. It is recommended the power point to be near the motor, otherwise you will need to have an extension cord available or have a power point installed closer to the motor.

Do you have a power point near the gate for the new motor to connect to? *

Our motors come with a 1m cord. It is recommended the power point to be near the motor, otherwise you will need to have an extension cord available or have a power point installed closer to the motor.

Would you like us to recommend an electrician? *
Is this the main entry garage door to a unit complex or carpark? *
Do you require any extra remotes or accessories for your Garage Door? If so, please select:
Do you require any extra remotes or accessories? If so, please select:
Please select all the accessories you require.
What type of seals would you like?
Do Seals need to be BAL Rated? *
Do you know your garage opening measurements? *
Please include opening height and width below for each door. Clearly label door 1, door 2 etc with height x width. e.g Door 1 2400H x 2600W
Do you know your gate opening measurements? *
Please include opening height and width below for each gate. Clearly label gate 1, gate 2 etc with height x width. e.g Gate 1 2400H x 2600W
Is this a residential or commercial property? *
What is the type of door / gate? *
How is the door / gate operated? *
How did you hear about us? *